
26 Inch Aluminum
Mountain Bike PRM-5 · Air Fork / Proposed 1 × 9 Build
Plan a PRM-5 wholesale build around a 26-inch aluminum alloy frame, an air-sprung thru-axle fork and a 720 mm alloy handlebar. The supplied component list proposes a single-chainring, 9-speed drivetrain with Shimano cassette and shifting components; the final rear derailleur and brake routing need build-sheet approval.
For distributors, wholesalers and bicycle shops. Request a verified configuration, sample information and quotation for your destination market.
Description
26 Inch Aluminum Mountain Bike Specifications
The PRM-5 source lists an aluminum dirt-jump-style frame with a black air suspension fork and a 26-inch TBR thru-axle wheelset. NECO headset bearings, WTB grips and a 31.6 mm two-bolt alloy seatpost form part of the proposed build. Use the table below to review the selected components for your wholesale bicycle order.
| Model | PEDRAVO PRM-5 |
|---|---|
| Frame | 26-inch aluminum alloy, dirt-jump-style frame |
| Fork | Black air-sprung suspension fork with thru-axle interface |
| Handlebar / Stem | 720 mm aluminum alloy handlebar / forged multicolor stem |
| Headset / Grips | NECO bearing headset / WTB grips |
| Proposed Drivetrain | Single chainring with a Shimano 9-speed cassette and supplier-listed “2010” 9-speed shifter; rear derailleur match requires approval |
| Crankset / Chain | Hollow aluminum alloy single-chainring crankset / KMC 9-speed, 108-link chain |
| Rear Derailleur | Supplier-listed Shimano “3020”; full model and 9-speed compatibility pending confirmation |
| Front Brake | Shimano MT200 hydraulic disc brake; final hose specification to be approved |
| Rear Brake / Rotors | Rear brake model not supplied / Shimano six-bolt rotors, size to be specified |
| Wheelset | 26-inch TBR thru-axle wheelset listed; axle and rear-hub details to be confirmed |
| Tires / Tubes | CST or Kenda tires / CST 26 × 2.125-inch Schrader tubes |
| Seatpost / Pedals | TBR 31.6 mm two-bolt aluminum alloy seatpost / all-aluminum bearing pedals |
| Minimum Order | 50 units per model |
Full 34-item supplied component list
All source entries are retained below. Blank specifications are marked as not provided; listed quantities do not establish a complete or compatibility-approved build.
| 01 / Frame | 1 pc. 26-inch aluminum alloy dirt-jump-style frame; geometry, alloy grade and intended-use category to be confirmed. |
|---|---|
| 02 / Fork | 1 pc. Black 26-inch air-sprung suspension fork with thru-axle interface. Travel and axle standard not specified. |
| 03 / Handlebar | 1 pc. Aluminum alloy handlebar, 720 mm width, colored graphics. Rise and clamp diameter not specified. |
| 04 / Stem | 1 set. Forged stem, multicolor finish. Material, length and angle not specified. |
| 05 / Headset | 1 set. NECO bearing headset; exact model and steerer interface to be confirmed. |
| 06 / Grips | 1 pair. WTB handlebar grips; exact model not specified. |
| 07 / Front Brake | 1 set. Shimano MT200 hydraulic disc brake with separate controls; complete lever/caliper part numbers to be confirmed. |
| 08 / Rear Brake | 1 set listed. Model and hydraulic system details are not specified. |
| 09 / Brake Rotors | 1 set. Shimano six-bolt rotors; exact rotor model, diameter and supplied quantity to be confirmed. |
| 10 / Front Brake Routing | 1 set. Source lists 75 cm housing and a 90 cm inner cable. This cable specification must be reconciled with the listed hydraulic brake before production. |
| 11 / Rear Brake Routing | Source lists a 160 cm inner cable and two 52 cm housing sections. Final rear brake and hydraulic hose specification require confirmation. |
| 12 / Crankset | 1 set. Single-chainring, hollow aluminum alloy crankset; crank length, chainring tooth count and bottom-bracket interface not specified. |
| 13 / Chain | 1 pc. KMC 9-speed chain, 108 links; exact model and final chain length to be checked. |
| 14 / Bottom Bracket | 1 set listed. Type, dimensions and compatibility are not specified. |
| 15 / Front Hub / Wheelset | 1 pc listed. Source specifies a 26-inch TBR thru-axle wheelset in this entry; individual hub dimensions are not provided. |
| 16 / Rear Hub | 1 pc listed. Rear hub, axle and freehub-body specifications are not provided. |
| 17 / Front Spokes | Quantity, material, gauge and length not provided. |
| 18 / Rear Spokes | Quantity, material, gauge and length not provided. |
| 19 / Rims | 2 pcs listed. Rim material, width and spoke count not provided. |
| 20 / Tires | 2 pcs. CST or Kenda; final brand, tread and tire size to be selected. |
| 21 / Inner Tubes | 2 pcs. CST 26 × 2.125-inch tubes with Schrader valves. |
| 22 / Rim Strips | 2 pcs. Butyl-rubber rim strips. |
| 23 / Cassette | 1 pc. Shimano 9-speed cassette; model and tooth range not specified. |
| 24 / Chainring Guard | Quantity and specification not provided. |
| 25 / Saddle | 1 pc. Silicone-padded saddle, supplier designation Kalote. Exact brand marking and model to be confirmed. |
| 26 / Seatpost | 1 pc. TBR aluminum alloy seatpost, 31.6 mm diameter, two-bolt saddle clamp. Length not specified. |
| 27 / Pedals | 1 pair. All-aluminum bearing pedals, supplier designation Jingye. Exact model not specified. |
| 28 / Kickstand | 1 pc listed. Specification not provided. |
| 29 / Front Derailleur | 1 pc listed without a specification. Inclusion must be reconciled with the single-chainring crankset. |
| 30 / Rear Derailleur | 1 pc. Supplier lists Shimano “3020”. Full part number and 9-speed system compatibility are not confirmed. |
| 31 / Shifter | 1 pair listed. Shimano “2010” 9-speed shifter; exact left/right parts and quantity for the single-chainring build to be confirmed. |
| 32 / Shift Cable Housing | 1 set. Supplied section lengths: 50 + 50 and 20 + 20 + 35. Units and routing to be confirmed. |
| 33 / Small Parts | 1 set. Washers and clamps. |
| 34 / Decals | 1 set. Model-specific graphics; artwork and branding to be approved. |
Final build sheet: Confirm frame geometry, riding-use category, alloy grade, fork travel, axle dimensions, rotor sizes, rear brake, tire size, drivetrain part numbers, bottom-bracket fit, weight and packing. The single-chainring entry also needs to be reconciled with the listed front derailleur and paired shifter quantity. Photos show the model presentation; the approved sample defines the supplied configuration.
A 26-inch mountain bike with an air fork for your wholesale range
If you are sourcing an aluminum mountain bike with an air suspension fork, send your frame-size requirements, destination market, quantity and component brief. For the proposed 9-speed configuration, include an approved rear derailleur and cassette match in the specification review.
Compare our wholesale mountain bike models or review OEM and private label bicycle options before selecting a sample.
Get a PRM-5 Wholesale Quote ▸
Private Label Aluminum Mountain Bike Options
Brand & appearance
Include your logo artwork, color preferences and decal requirements in your brief. Available finishes are listed in the quotation.
Component selection
Share your frame size, air-fork setup, drivetrain and brake requirements. Request a reviewed build sheet for PRM-5.
Packaging & market
Tell us your destination, carton requirements and any documentation or market requirements before sample approval.
How to Order PRM-5 Mountain Bikes in Bulk
01 / Send your brief
Quote PRM-5, your quantity, destination and target configuration. MOQ starts at 50 units per model.
02 / Review the build
Review the specification sheet, sample options, pricing and proposed production schedule.
03 / Approve your order
Approve the sample, written specifications, branding and packaging before bulk production is arranged.
PRM-5 Mountain Bike Wholesale FAQs
What frame and fork are listed for PRM-5?
The source lists a 26-inch aluminum alloy dirt-jump-style frame and a black air-sprung suspension fork with a thru-axle interface. Frame geometry, intended riding category, fork travel and axle standards require confirmation for the selected build.
Is the proposed 9-speed drivetrain confirmed?
The cassette, chain and shifter entries specify 9 speeds, while the rear derailleur is only named “Shimano 3020”. The complete rear derailleur part number must be verified. If it is RD-M3020-8, Shimano lists 7/8-speed compatibility, so it cannot be described here as an approved 9-speed match.
Which hydraulic disc brakes are specified?
The front brake entry lists Shimano MT200. The rear brake model is blank. Source routing lengths describe mechanical cables, so the hydraulic hose, fittings and complete front/rear brake specification must be agreed before sample approval.
Which tires and wheelset are listed?
The source lists a 26-inch TBR thru-axle wheelset, CST or Kenda tires and CST 26 × 2.125-inch Schrader-valve inner tubes. Confirm final tire brand, width, tread, axle dimensions and rear freehub interface in the build sheet.
Can I order a private label 26-inch mountain bike?
Send your logo artwork, frame colors, decals, size requirements and packing brief. We will review available branding and component options for the PRM-5 project.
What is the minimum wholesale order quantity?
The MOQ is 50 units per model. Provide the quantity, destination and required configuration so the quotation can address your order.
Plan Your PRM-5 Wholesale Mountain Bike Order
Send your destination market, quantity and target configuration. The form will include model PRM-5 for a component review and quotation.
Enquire About PRM-5 ▸